Product Description
Evolution Hopper This belt driven hopper has been re-engineered and the result is an improvement over existing belt driven hoppers in its performance and maintenance. The unique concept provides a single build type hopper that is suitable for 95% of world’s coins and tokens without needing adjustments. The Evolution Hopper is suitable for many applications such as: Vending, Parking, Change, Amusement and Gaming machines. Made from extremely strong, wearing resistant plastics in combination with state of the art electronics resulting in low cost of ownership. Large DC motor in combination with electronic motor control board for reduced friction and motor noise. Optic board is easily accessible by removing the electronic control board from outside the hopper. Connector can be easily changed from front to back by just loosening two screws and pulling the cable with connector in its position. (reduced inventory for manufacturers that use both styles) Standard parallel interface. Features: Modular space –efficient system High capacity >1200 coins of 1 Euro Pay out speed 4 coins per second Built-in agitator to prevent coin jams Hopper is protected by anti-jam electronics Large motor reduces motor noise High quality materials for long trouble free operation Easily removable and accessible electronics Hopper connector can easily be changed from front to back Low and high level sensing Competitively priced Low cost of ownership Shutter Version: The function of the added shutter is 2 fold: First it prevents spilling any coins through the coin exit port, in case a hopper is moved in or out of a machine. Secondly, it prevents the insertion of any tools, that could be used to tamper the opto-sensor inside the coin exit port, that could cause any fraud. As soon as the hopper starts paying coins, the shutter opens, and closes again when a payment is finished. All other features and dimensions are the same as the normal Evolution hopper range. Variations: Connector: Front = same side as coinexit Rear = oposite of coinexit coins/diameter 20.00 - 30.00 mm 19.00 - 26.40 mm 16.25 - 20.90 mm Interface: parallel Mode 0-Mode 1 - Mode 2 parallel shutter CC-talk non encrypted CC-talk encrypted CC-talk ITA Technical data: Capacity: 2,- Euro 25.75/2,20 approx. 1000 coins 1,- Euro 23.25/2,35 approx. 1200 coins 0,5 Euro 24.25/2,40 approx. 1100 coins Berechung Hopperkapazität: 1,200.000 Capacity = Hopper volume/Coin volume = TT x D² D = Coin diameter (mm) -------- x TK T = Coin thickness (mm) 4 Lifetime : up to 3 Millionen coins Operation temperature: 0 bis 60 ° C Mounting: +/- 3° of vertical in any direction Voltage: 24 VDC min. 18 VDC max. 26 VDC Current (typical): idle 40 mA payout 0,2 Ampere (empty) payout 0,7 Ampere (full) payout 2,5 Ampere (surge) Dimension: HxWxD 286 x 226 x 126 mm DO NOT use the hopper in an explosive atmosphere Versions: EV13000 EV12000 EV14000 EV11000 EV15000 EV03000 EV02000 EV04000 EV01000 EV05000 EV13003 EV12003 EV14003 EV11003 EV15003 EV03003 EV02003 EV04003 EV01003 EV05003 EV13004 EV12004 EV14004 EV11104 EV15004 EV03004 EV02004 EV04004 EV01004 EV05004
