Product Description
PCB / Microswitch Board for Joystick – Spare Part PCB / Microswitch Board for Joystick – Spare Part for E-Laut Claw Machines This PCB is a replacement part for the joystick unit mainly used in E-Laut claw machines and similar crane machines. The board is equipped with several microswitches and detects the joystick movement directions: left, right, forward and backward . This spare part is especially useful when the joystick mechanism itself is still in good condition, but one or more movement directions no longer switch reliably or do not respond at all. By replacing the microswitch board, the existing joystick can often be repaired without replacing the complete joystick unit. Product Features Replacement PCB for joystick unit Mainly suitable for E-Laut claw machines With pre-installed microswitches For 4-way control: left, right, forward and backward Direction markings printed on the board Connection via plug connector Ideal for defective or unreliable joystick switching functions Cost-effective repair solution instead of replacing the complete joystick Application This PCB is installed inside the joystick of claw machines and detects the movement direction of the control lever. It is a typical wear and repair part when the machine no longer responds correctly to one or more joystick directions. Typical Fault Symptoms Claw no longer moves left, right, forward or backward One movement direction only reacts intermittently Joystick clicks mechanically, but no movement is triggered Microswitches are worn or damaged PCB or connector contacts are defective Note Before ordering, please compare the shape of the PCB, the connector, the position of the microswitches and the markings with the existing part. Different versions may be installed depending on the machine or joystick model.
